Manage Remote Web Access in Windows Server Essentials | Microsoft Learn

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Microsoft invites everyone to get acquainted with the features of the server platform using trial versions of Windows Server or Windows Server Downllad or DatacenterEvaluation. June 16, at am TheDoc says:. Warning Users who use Remote Web Access from public locations or other untrusted computers should ensure that they log off the website по этому адресу leaving the computer unattended or when they are читать with their session.
 
 

 

Windows server 2012 r2 essentials port forwarding free download

 

Is this page helpful? Yes No. Any additional feedback? Skip Submit. You should forward the following ports to the address of the server: – 80 For hosted configuration, only use – You should enable UPnP support to provide the easiest router configuration for the customer and the best customer experience during installation.

Warning: The UPnP architecture can pose a security risk if it is left enabled. This means that you can access the desktop of a networked computer as if you were sitting in front of it at your office. Remote Web Access is not turned on by default. When you run the Set up Anywhere Access Wizard, the wizard attempts to set up your router and Internet connectivity. You can also set up the router again if you change your router.

Permission to access Remote Web Access is not automatically granted when you add a new user account. When you add a user account, you can choose to allow access to shared folders, the Media Library, computers, Home page links, and the server Dashboard. You can also specify that a user not be allowed to use Remote Web Access. To change the Remote Web Access setting, right-click the user account, and then click View the account properties.

From the drop-down list, select the new region, and then click Apply to accept the new region setting. When you add a user account in Windows Server Essentials, the new user is allowed by default to use Remote Web Access. If you chose not to allow Remote Web Access for a user account, and then find that the user needs to use Remote Web Access, you can update the user account’s properties. Click the user account that you want to manage, and then click View the account properties in the Tasks pane.

On the Anywhere Access tab, select the Allow Remote Web Access and access to web services applications check box to allow a user to connect to the server using Remote Web Access. For more information, see Manage User Accounts.

Windows Server Essentials uses a security certificate to help secure the information that is exchanged between the software and a web browser. When you install the Connector software on your computers, the security certificate for Windows Server Essentials is added to the trusted certificate list on your computers. The best way for users to access Remote Web Access when they are away from your office is to use a portable computer that has the Connector software installed on it.

Users who use Remote Web Access from public locations or other untrusted computers should ensure that they log off the website before leaving the computer unattended or when they are finished with their session. This is especially useful if you have a client computer that is set up with network accounts that can be used to connect to a hosted Windows Server Essentials server through a VPN connection. All the newly created user accounts on the hosted Windows Server Essentials server must use VPN to log on to the client computer for the first time.

In the list of user accounts, select the user account that you want to grant permissions to access the desktop remotely. To allow a user to connect to the server by using Remote Web Access, select the Allow Remote Web Access and access to web services applications check box. If you change routers or change settings on the router, you must rerun the Set Up Your Router Wizard.

For more information, see the following topics:. Replace a router. Network location defined. Your network configuration should follow the supported network requirements for Windows Server Essentials. There should be only one router on your network. For information about how to set up port forwarding on your router, see the Small Business Server forum. Replace the router according to the manufacturer’s instructions, and then run the Set Up Your Router Wizard to configure the new router.

Click the Anywhere Access tab, and then in the Router section, click Set up. A network location is a collection of network settings that Windows applies when you connect to a network. The settings vary and can be customized based on the type of network that you use. The settings for a network location determine whether certain features such as file and printer sharing, network discovery, and public folder sharing are turned on or off.

Network locations are useful when you need to connect to different networks. As an example, you may own a laptop computer that you use at home and on the job. When you are in the office, you connect to the office network.

However, when you come home, you use your laptop to access and play videos and music that is stored on the home server. When you connect to a new network and specify the location type, Windows assigns a network profile that is preset for that type of location. The next time you connect to that network, Windows recognizes the network and automatically assigns the correct settings. This adds a layer of security to help protect the information on your computer, and only the network features that you need for that location are turned on.

Home network Choose this network for home networks or when you know and trust the people and devices on the network. Computers on a home network can belong to a home group. Network discovery is turned on for home networks, which allows you to see other computers and devices on the network and allows other network users to see your computer. Work network Choose this network for small office or other workplace networks. Network discovery, which allows you to see other computers and devices on a network and allows other network users to see your computer, is on by default, but you cannot create or join a home group.

Public network Choose this network for public places such as coffee shops or airports. This location is designed to keep your computer from being visible to other computers and to help protect your computer from malicious software from the Internet. Home group is not available on public networks, and network discovery is turned off. You should also choose this option if you’re connected directly to the Internet without using a router, or if you have a mobile broadband connection.

Domain Choose this network for domains such as those at enterprise workplaces. This type of network location is controlled by your network administrator, and it cannot be selected or changed.

After Remote Web Access is turned on, you can set up a domain name for your server that is running Windows Server Essentials. This is a necessary step if you plan to use Remote Web Access from a remote computer. Domain names overview. Understand Microsoft personalized domain names. Use a new or existing domain name.

Set up a domain name. Choose a domain name service provider. Choose a domain name. Choose a domain name prefix. Choose a domain name extension. Update or upgrade your domain name service. Export or import your certificate on your server. Set up a domain name manually.

Find your domain name service provider. A domain name uniquely identifies your server on the Internet. Cant use port for Anywhere Access. Hope this helps. Best regards,. Justin Gu. Office Office Exchange Server. Not an IT pro? Sign in. United States English. Ask a question.

Quick access. Search related threads.

 
 

Windows server 2012 r2 essentials port forwarding free download

 
 
The administrator will need to change the URL for connecting to the Windows Server hosting the clients sync share. Unfortunately, Essentials is pretty much considered to be abandonware by Microsoft now, and so unless something really forces their hand on this issue such as a major security breach in this area, etc. However, you do have a nice suggestion to print i.